Underfloor heating installation on Wentworth Estate
We install luxury, fit-only bathrooms for homeowners on Wentworth Estate in Virginia Water, Surrey — the private, gated estate built around Wentworth Club and its golf courses, home of the BMW PGA Championship — around 15 to 20 minutes by road from our Bracknell base. Underfloor heating is one of the most requested additions on the estate, and because access here runs through a gate and often a managing agent, we plan deliveries and site visits around that from the outset.
Why gate access changes how we schedule an underfloor heating job
You source the sanitaryware, brassware, tiles and furniture; we strip out, first-fix, tile, plumb and snag, from £3,500, coordinating access with the estate and any managing agent so the programme runs without delay at the gate. Underfloor heating adds extra deliveries to a job — insulation boards, the heating mat or pipe, screed bags if we're going the water-fed route, plus an electrician's visit to wire in the thermostat — and each of those needs to clear the gate on schedule. We agree delivery windows and contractor passes with the estate and managing agent before work starts, so the mat or pipe goes down, gets tested, and is covered in one continuous sequence rather than being held up waiting on access.
Matching the system to your particular Wentworth Estate house
Houses on the estate vary in age and construction, so we don't assume a floor type before we've surveyed it. A suspended timber floor calls for a rigid insulation-backed board across the joists carrying a low-profile electric heating mat, keeping added height to a minimum while directing heat up into the room. A solid concrete slab opens up a screeded water-fed system tied into the existing central heating, which tends to cost less to run across a larger bathroom footprint. The £125 survey confirms which you have before we quote.
Floor height allowance
Whichever system suits your floor, underfloor heating adds height on top of what's there now — insulation, then the mat or pipe, then screed or board, then tile adhesive and tile. Totals typically run from around 15mm for a thin electric system to 70mm or more for a screeded water-fed one. We measure this against doors and any threshold at survey stage so it's planned for rather than discovered once the floor is tiled.
The installation itself
With access and deliveries agreed with the estate, we strip the existing floor back, make good any structural issues, lay insulation, fit and test the mat or pipe, then cover it with screed or board ahead of tiling. The thermostat is wired in, commissioned and tested, and the finished room is snagged before handover.
Frequently asked questions
We coordinate access and delivery timings with the estate and any managing agent before work starts, so contractor passes and material deliveries for insulation, mat or pipe, and screed are agreed in advance.
Around 15 to 20 minutes by road, which lets us schedule multiple site visits and deliveries efficiently across an underfloor heating installation.
It depends on your floor. A suspended timber floor usually suits a low-profile electric mat; a solid concrete slab opens up a screeded water-fed system tied into your existing central heating. We confirm which you have at survey.
Yes, typically by 15mm to 70mm depending on the system, once insulation, the heating element, screed or board, and tile are accounted for. We check this against doors and thresholds before work starts.
Yes, it's most efficient fitted during a full strip-out and refit from £3,500, sequenced alongside first-fix plumbing and before tiling.