Matki bathroom installation in Ascot
The Victorian villas, inter-war houses and newer executive-style builds that make up much of Ascot each give a Matki specification a different amount of room to work with, and that matters more than it would with most shower brands. Matki's enclosures and screens are built to a minimal, largely frameless aesthetic, which leaves almost no trim to hide an inaccurate opening or an uneven wall — the glass does the talking, so the measuring has to be right first. In a larger Ascot property, a generous plot and a roomier shell generally make it easier to true up an opening or adjust a stud wall before the glass arrives; in an older Victorian or Edwardian section of a house, we're more often working around an existing wall line rather than creating a fresh one. Either way, we fit only — you choose the Matki screen or enclosure through a showroom or designer, and we handle the strip-out, first fix, tiling, wall fixing and snagging needed to get it installed properly, from £3,500.
What we install from Matki in Ascot
Matki is specified by Ascot homeowners for shower enclosures and screens where a minimal, largely frameless look is the point — a clean run of glass with as little visible frame or trim as the design allows. That aesthetic is exactly why the installation has to be precise: there's no deep frame or wide trim profile left to disguise a slightly-off opening, an out-of-true wall, or a shower tray that isn't level, so whatever's underneath the glass has to be correct before a single panel goes in. We work from the specification you've already chosen — the enclosure size, the glass configuration, the fixing hardware finish — and build the strip-out, first fix and tiling sequence around getting the substrate right for it, rather than treating it as a standard screen fit.
Installation considerations specific to Matki
The single biggest factor on a Matki job is what happens before the glass turns up. Because there's so little trim to mask an error, the opening has to be measured accurately against the finished tiling, not the bare walls, and the wall fixing points for the hinges or channel need to land on sound, correctly prepared substrate rather than a patch of plaster that happens to be in the right place. Sequencing matters too — the shower tray has to be set level and the surrounding tiling finished to the exact dimension the enclosure is ordered to, because a frameless or minimal-framed screen has very little adjustment built in once it's cut to size. We confirm these dimensions and the fixing detail before the glass is ordered, not after it arrives on site.
How Ascot's housing stock affects a typical Matki installation
Ascot's mix of large Victorian and Edwardian houses, inter-war family homes and more recent executive-style builds on generous plots generally gives us more freedom to get the substrate right before a Matki enclosure goes in. Where a layout needs adjusting — moving a waste run, widening a shower recess, or squaring up a wall that's slightly out of true — the extra space a bigger Ascot plot allows usually means that work can be done properly rather than compromised around a tight footprint. In an older Victorian or Edwardian property, we're often working with solid masonry walls that take a fixing well once they're prepared, though original plaster lines can be less than true and need checking at survey. In a newer executive-style build, stud walls are more common, and we confirm there's solid backing exactly where the Matki hinge or channel fixings need to land before any board or tile goes on.
Fit-only, from £3,500
We install Matki products on a fit-only basis — you choose and supply the enclosure, screen and fixing hardware through your showroom or designer, and we handle the strip-out, first fix, tiling, wall preparation, glass installation and snagging. Projects start from £3,500, and every one begins with a fixed-price £125 survey, deducted from your project cost if you go ahead, where we measure the opening against the finished tiling plan and confirm exactly what your Ascot property's walls need before the glass is ordered.
Frequently asked questions
We fit only. You choose and buy your Matki shower enclosure or screen through a showroom or designer, and we handle the strip-out, first fix, tiling, wall fixing and installation, from £3,500.
A frameless or minimal-framed design leaves almost no trim to hide an inaccurate opening or an out-of-true wall. The glass is cut to a fixed size, so the opening, tray and tiling it fits into have to be correct before it's ordered.
Generally, yes — a bigger plot and roomier shell usually give us more scope to true up a wall or adjust a layout before the glass arrives. But we still check the substrate and fixing points at survey, whatever the size of the house.
Yes. Solid masonry generally takes a wall fixing well once it's prepared, though original plaster lines in a Victorian or Edwardian property can be less than true, which we check and correct for at survey before the enclosure is ordered.
We measure the opening against the finished tiling plan, confirm the shower tray will sit level, and check the wall substrate at the exact points the hinge or channel fixings need to land, so the enclosure can be ordered to the correct size first time.