Matki bathroom installation in Gerrards Cross

Getting a Matki shower screen from a Bracknell-area supplier to a bathroom in Gerrards Cross is a twenty-five to thirty minute drive, and once a panel of that size has been cut to the exact measurements of an opening, there's no adjusting it on site if the opening turns out to be wrong. That's the detail that matters most with Matki: its enclosures and screens are built to a minimal, largely frameless aesthetic, with very little trim left to hide an inaccurate opening or an out-of-true wall, so the glass does the talking and the measuring has to be right before the order goes in, not after. We install luxury, fit-only bathrooms for homeowners across Gerrards Cross and the surrounding Buckinghamshire commuter villages — you source the Matki enclosure, sanitaryware and tiles; we strip out, first-fix, tile, fix the glass and snag, from £3,500.

What we install from Matki in Gerrards Cross

Matki is typically specified in Gerrards Cross for shower enclosures and screens designed around a clean, largely frameless run of glass, often as the centrepiece of an en-suite or family bathroom refit. The appeal is the minimal hardware — but that same minimalism means there's no deep frame to hide a mistake in the opening, the tray level or the tiling dimension beneath it. We work from the specification you've chosen, confirm exactly how the enclosure is configured and what hardware finish it uses, and build the strip-out, tiling and fixing sequence around getting the substrate correct, since the glass itself arrives pre-cut and fixed.

Installation considerations specific to Matki

Because a Matki panel is ordered to size and transported to site already cut, the wall fixing detail has to be settled before that panel leaves the supplier — there's no trimming a frameless screen down on site the way you might with a boxed, heavily-framed alternative. We measure the opening against the finished tiling plan, not the bare wall, confirm the shower tray will sit level, and check that the wall substrate at the exact hinge or channel fixing points is sound and correctly prepared. Get any of that wrong and the result isn't a quick fix on fitting day — it's a re-ordered panel and a delay, which is exactly what getting the sequence right at survey avoids.

How Gerrards Cross affects a typical Matki installation

Gerrards Cross sits far enough from our Bracknell base that scheduling a Matki fit means planning the full sequence in advance — strip-out, first fix, tiling, and the glass fixing itself — so that the pre-cut enclosure arrives on site exactly when the substrate is ready for it, rather than sitting around or being ordered before the opening is confirmed. As a commuter village, a lot of the properties we work on here have been extended or refitted over time rather than built from scratch, which means we're often confirming what an existing wall or floor build-up actually is before deciding where a Matki channel fixing can land, rather than assuming a standard stud or masonry detail applies.

Fit-only, from £3,500

We install Matki enclosures and screens on a fit-only basis — you choose and supply the glass, hardware finish, sanitaryware and tiles, and we handle the strip-out, first fix, tiling, wall preparation, glass fixing and snagging. Installations across Gerrards Cross start from £3,500, and every project begins with a fixed-price £125 survey, deducted from your project cost if you go ahead, where we measure the opening and confirm what your property's walls need before the enclosure is ordered.

Frequently asked questions

Related