Porcelanosa bathroom installation in Windsor

Windsor's housing splits fairly cleanly into two character types: close to the Castle and the historic centre, Georgian and Victorian town houses on narrow plots with limited rear access and period staircases; further out, more typically inter-war and post-war family homes, with some newer developments on redeveloped sites. Porcelanosa's large-format porcelain can go into either type of property, but the practicalities differ - in a narrow Windsor town house, moving a slab of rectified porcelain up a period staircase takes more planning than in a modern house with a wider hallway, and either way the substrate still needs to be checked and prepared flat before the tile goes down.

Flatness first: why Porcelanosa is unforgiving

Porcelanosa's large-format porcelain is dense, rectified and dimensionally precise - which is exactly why it punishes an uneven substrate or an inconsistent joint far more visibly than a smaller, more forgiving tile would. Fitting it well is a matter of tolerance, not taste: the floor or wall is checked and prepared flat first, then the tile is set with the correct bed coverage, joint width and lippage control to let the material's own precision show through.

Two housing types, two sets of access challenges

Close to Windsor Castle and the historic centre, there's a concentration of Georgian and Victorian town houses, many on narrow plots with limited rear access and period staircases that constrain how much material can be moved through the building at once. Further out, towards the edges of town, the housing is more typically inter-war and post-war family homes, with a scattering of newer residential developments on sites that have been redeveloped over the years. In a period town house, we plan deliveries of large-format Porcelanosa slabs around what the staircase and doorways can actually take, moving material in smaller, safer loads; in the more open inter-war and post-war properties, wider hallways and rear access usually mean fewer constraints on how the job is sequenced.

What we install from the Porcelanosa range

We fit Porcelanosa's large-format porcelain across floors, walls, shower enclosures and wet rooms, including pale limestone-look finishes alongside marble-look and stone-look options. As a fit-only installer, you buy the tile along with your sanitaryware, brassware and furniture, and we handle everything from strip-out through to the finished, fully fitted room.

Setting large-format tile correctly

Large slabs need full solid-bed adhesive coverage rather than spot bonding, because any void beneath a tile this size will eventually crack under foot traffic or thermal movement. We keep joint widths narrow and consistent to suit the rectified edge, use lippage-control systems to pull adjacent tiles level while the adhesive is still workable, and build in movement joints at room boundaries and around fixed items like baths, so the finished surface can move without cracking at the grout line.

The fit-only process: survey, install, price

We start with a paid survey at £125, where we check floor levels, substrate condition and - in a period Windsor property - access routes through the building for large-format material. Installation covers strip-out of the existing bathroom, first-fix plumbing and electrics, tiling, final-fix plumbing and snagging, with installs starting from £3,500 depending on room size and scope. You buy the tile, sanitaryware, brassware and furniture directly; we handle everything to do with fitting it, insured throughout.

Frequently asked questions

Related