Bette bathroom installation in Virginia Water
Large detached properties close to the Wentworth Estate and its golf courses define much of Virginia Water, many set on generous plots with long driveways and, in a number of cases, gated or private road access. Properties range from substantial period houses to more recent executive-style builds, and that plot size generally gives us far more flexibility on bathroom layout than a terraced property would. It also matters that the bath going in is often a Bette: titanium-steel finished with fused glass enamel, harder and more scratch-resistant than acrylic, but reliant on a properly built base beneath it. We install Bette baths and shower trays with the substructure, levelling and acoustic isolation the material needs, using the room a typical Virginia Water property gives us to get the layout right first.
Titanium-steel and fused glass enamel, properly supported
A Bette bath or shower tray starts life as titanium-steel, finished with a fused glass enamel surface that resists scratching far better than acrylic. What it doesn't do is forgive an unevenly built base. Acrylic baths can absorb minor inconsistencies in a subfloor by flexing slightly; a Bette shell won't, so any movement in the structure underneath shows up as noise, a stress point, or a shell that never beds in flush against its surround. Our approach to a Bette installation is built around that fact from the first site visit.
Virginia Water's generous plots change what's possible
Virginia Water's housing, whether a substantial period house or a more recent executive-style build, typically sits on a generous plot, often with a long driveway and sometimes gated or private road access. That space usually gives us far more flexibility on layout than a terraced property would allow. Relocating a waste run to accommodate a freestanding Bette bath, or repositioning a shower to make better use of natural light, rarely runs into a structural wall it can't move around, which means the finished layout is driven more by what works for you than by what the building will permit.
What we build underneath a Bette bath or tray
Before the bath or tray goes anywhere near the room it'll sit in, we build and level a substructure sized to its exact footprint, brace it so the steel shell can't flex or rock once it's carrying weight, and isolate it acoustically so sound doesn't transmit through the floor below. Each of those is a distinct piece of work. Leaving any of them out is how a Bette installation ends up feeling loose underfoot or developing a stress crack in the enamel within the first year.
The process, from £125 survey to finished install
We work fit-only, meaning you buy the Bette bath or shower tray, your brassware, tiles and furniture, and we carry out everything else. A £125 survey comes first, assessing the floor, waste positions and access for your Virginia Water property and confirming what substructure your chosen model needs. From there: strip-out, first-fix plumbing, substructure build and tiling, fitting the bath or tray and brassware, and a final snag before we leave. Installs start from £3,500.
Arrange a survey
If a Bette bath or shower tray is part of your plans in Virginia Water, book the survey first so we can see the floor, waste run and access before anything is costed. Call or WhatsApp 07399 651836.
Frequently asked questions
Because titanium-steel finished with fused glass enamel doesn't flex the way acrylic does. Any unevenness in the floor beneath it shows up as noise or stress on the enamel rather than being absorbed, so it needs a purpose-built, level, braced and acoustically isolated base.
It can. The generous plots typical of Virginia Water properties often give more flexibility to move a waste run or reposition a shower for better light than a terraced property's structural walls would allow.
You do. We work fit-only, so you purchase the bath, shower tray, brassware, tiles and furniture, and we handle strip-out, first-fix, tiling, plumbing and snagging.
We check the floor structure, waste positions and access route, and confirm the substructure, levelling and acoustic isolation your chosen Bette model will need before the job is priced.
Installs start from £3,500, with the exact figure depending on the scope of work confirmed at survey.
Yes. Bette makes shower trays in the same titanium-steel and fused glass enamel finish as its baths, and they need the same levelling and substructure work underneath.